How to Frame Your House Of The Wise Print
By Pixel Empire - Where Pop Culture & Design Unite! | Published: 2026-10-24
Category: How-to Guides
Learn how to frame your House Of The Wise print from Pixel Empire with step-by-step advice on matting, glass, and hanging to preserve and display your art.
Quick answer
Frame your House Of The Wise print with acid-free matting, UV-protective glass, and a solid backing to keep the black design crisp and the paper flat for years.
Why framing matters for your print
A print like the House Of The Wise hoodie design deserves a frame that protects it from light, moisture, and dust. The sleek black background and subtle wizarding-world nod look best when the paper stays flat and the colors don't fade.
Skip cheap poster frames with thin glass and no mat — they can cause the print to ripple or stick to the glass over time. A proper frame setup is a small investment that keeps your art gallery-ready.
Choosing between Classic and Premium styles
The House Of The Wise print is available in Classic and Premium styles. Classic is a standard paper print that fits most off-the-shelf frames. Premium uses a thicker, archival-quality paper that needs a deeper frame to avoid bending.
If you order the Premium style, check the frame depth before buying. A standard 0.5-inch deep frame may not leave enough room for the thicker paper plus a mat.
Step-by-step framing guide
- 1. Measure your print and choose a frame: Measure the exact dimensions of your House Of The Wise print. Buy a frame that is at least 2 inches larger on each side to leave room for a mat. A mat creates a visual border and keeps the print from touching the glass. Common mistake: buying a frame that matches the print size exactly — without a mat the print can buckle or stick to the glass.
- 2. Select acid-free matting and backing: Use an acid-free mat board and backing board. Acid from cheap cardboard can yellow the paper over time. Cut the mat opening slightly smaller than the print so the edges are hidden and the image stays centered. Checkpoint: if you see a brown edge on the mat after a few months, the board is not acid-free — replace it immediately.
- 3. Pick UV-protective or anti-reflective glass: Standard glass blocks very little UV light. Choose UV-protective glass to prevent fading of the black ink and any colored accents. Anti-reflective glass reduces glare if the print hangs opposite a window or lamp. Common mistake: using non-glare acrylic that can scratch easily — glass is better for long-term display.
- 4. Assemble and seal the frame: Place the backing board, then the print, then the mat, and finally the glass. Use framer's tape to seal the back and keep out dust. Insert the frame backing tabs or screws tightly so the sandwich stays flat. Checkpoint: leave a tiny breathing gap if the room has humidity changes — a completely sealed frame can trap moisture.
- 5. Hang and maintain your framed print: Hang the frame away from direct sunlight and high-humidity areas like bathrooms or kitchens. Dust the glass with a microfiber cloth every few weeks. Rotate the print every year if it gets direct light to avoid uneven fading. Common mistake: hanging above a radiator or air vent — temperature swings can warp the paper and loosen the frame joints.
Product facts
- House Of The Wise: The House Of The Wise hoodie from Pixel Empire is a subtle nod to the wizarding world, featuring a sleek black design. The dark background means any dust or glare behind glass will be very noticeable, so use anti-reflective glass and clean both sides before sealing.
House Of The Wise
