How to Frame and Display Your House Of Wisdom Print

By Pixel Empire - Where Pop Culture & Design Unite! | Published: 2026-11-02

Category: How-to Guides

A practical, step-by-step guide to framing, hanging, and caring for your House Of Wisdom art print, with sizing tips, gallery wall layout advice, and common mistakes to avoid.

Quick answer

Frame your House Of Wisdom print with a mat that complements the artwork, hang it at eye level in a spot away from direct sunlight, and use a level to keep it straight. For a gallery wall, lay out the arrangement on the floor first and keep spacing consistent.

Why framing choices matter for this print

The House Of Wisdom print features subtle, understated fandom imagery, so your frame should enhance rather than overpower it. A simple black or natural wood frame with a white or off-white mat draws attention to the artwork while keeping the look clean. Avoid overly ornate frames that compete with the design.

If you plan to hang the print in a brightly lit room, consider UV-filtering glass or acrylic to protect the colors from fading. This is especially important for prints displayed near windows or in sunrooms.

Choosing the right spot

Pick a location where the print will be seen and appreciated daily—above a desk, in a reading nook, or as part of a gallery wall. Keep it out of direct sunlight and away from heat sources like radiators or fireplaces, which can damage the print over time.

For small prints, a smaller wall or a tighter space works best. Larger prints can anchor a room but need enough wall space to breathe.

Step-by-step framing and display guide

Measure your print: Use a ruler to measure the exact dimensions of your House Of Wisdom print. Common print sizes include 8x10, 11x14, and 16x20 inches. Write down the measurements—you'll need them to buy the right frame. Double-check your measurements; a frame that's even a quarter-inch too small will not fit.
Choose a frame and mat: Select a frame that matches your decor and a mat that provides breathing room around the artwork. A mat width of 2-3 inches is typical. Make sure the frame's inner dimensions match your print size plus the mat opening. Bring your print measurements to the store or keep them handy when ordering online to avoid returns.
Prepare your workspace: Clear a large, clean table and cover it with a soft cloth. Wash and dry your hands to avoid smudges. Handle the print by the edges only. Never touch the printed surface directly; oils from your fingers can cause permanent damage.
Assemble the frame: If your frame comes with a mat, place the mat inside the frame first. Then carefully lay your print face-up on the mat, ensuring it's centered. Insert the backing board and secure it with the frame's clips or tabs. Work slowly and check alignment before securing the backing; adjusting later risks creasing the print.
Attach hanging hardware: Most frames come with hanging hardware, but if not, install D-rings and wire or a sawtooth hanger. Use a level to mark the hanging point on the wall. For heavy frames, use two hooks for stability. Test the hardware's security by gently pulling on it before hanging the frame.
Hang the print at eye level: The center of the artwork should be about 57-60 inches from the floor, which is average eye level. If hanging above furniture, leave 6-8 inches between the bottom of the frame and the furniture top. Use a level to ensure the frame is straight; even a slight tilt is noticeable.
Plan a gallery wall layout: If creating a gallery wall, arrange all frames on the floor first. Keep 2-3 inches between frames for a cohesive look. Start with the largest piece as the anchor and build around it. Take a photo of your floor layout to reference while hanging.

Product facts

House Of Wisdom: The House Of Wisdom hoodie is a black unisex hoodie available in Classic and Premium styles, sizes S through 3XL. If you're a fan of the wizarding world, this hoodie lets you show your fandom subtly while staying comfortable—pair it with your print for a themed display.
House Of Wisdom